Exterior Painting Services in Reno, Nevada

Black house icon with a smaller front building and a circular window on a white background

Exterior Painting Starting With Serious Surface Preparation

Two exterior repaints on the same street can be seven years apart in how long they hold, and the difference is almost never the paint. Exterior painting is a preparation trade with a color step at the end, something 15+ years of repainting failed work across Reno, Nevada has made entirely plain. Washing lifts chalk and spores, scraping removes what has let go, sanding feathers the edges, and caulking closes the joints that opened last winter before priming seals everything.


Substrate steers the product. Wood wants a flexible film, fiber cement behaves differently again, and stucco needs a coating breathable enough to release vapor from inside the wall, with two coats standard because that is the build warranties are written around. Preparation doubles as inspection, so Bighorn Painting & Drywall shows soft trim, failed caulk, and hidden rot before touching them, then schedules around forecast and surface temperature instead of pushing work through weather that will not let it cure.

Our Exterior Painting Services

Full Exterior Repainting

Whole house projects run smoothest when sequencing is planned upfront. Washing, spot repairs, priming, and finish coats follow in order across every elevation, so nothing gets coated before the surface beneath it is genuinely ready.

Siding and Fascia Coating

Wood, fiber cement, and composite each behave differently under a brush. We identify the material, address failing sections, and select coatings formulated for that substrate so expansion and contraction do not crack the finished film.

Stucco and Masonry Painting

Porous surfaces drink product, which is why breathable elastomeric and masonry coatings matter here. Cracks get filled, textures are matched, and application rates stay high enough to bridge hairlines without smothering the wall texture completely.

Exterior Trim and Shutter Painting

Details take the hardest hit from weather because edges shed protection first. Our team sands failing areas, seals raw end grain, caulks joints, and applies flexible finishes to window casings, corner boards, and shutters.

Soffit and Eave Refinishing

Overhead areas get ignored until staining or peeling becomes obvious from the driveway. Ladder work up here covers soffits, eaves, and vents, restoring uniform color while sealing gaps where moisture and pests find entry.

Exterior Surface Washing and Prep

Chalk, dust, and mildew stop adhesion cold. Pressure washing removes what has built up over years, scraping addresses failing film, and spot priming locks down bare areas before finish coats ever leave the sprayer.

Benefits of Exterior Painting

Stronger Curb Appeal

Neighbors notice, and so do buyers. A crisp exterior instantly changes how your property reads from the street, lifting the entire lot without any structural work or expensive new landscaping to go along with it.

Defense Against UV and Moisture

High altitude sunlight breaks down unprotected surfaces remarkably quickly. Modern coatings block ultraviolet damage while shedding rain and snowmelt, keeping water out of joints where rot quietly begins long before anyone sees visible evidence.

Early Detection of Wood Damage

Prep work doubles as an inspection. Because every board gets touched, you find out about soft trim, failing caulk, or hidden rot while repairs are still small and inexpensive rather than after real structural loss.

Longer Siding Lifespan

Replacement costs many times what maintenance does. A sound coating system keeps siding sealed, stable, and protected through decades of expansion and contraction, pushing that expensive replacement conversation far into the future for you.

Weather Timed Scheduling

Rushing a coat before a cold night ruins everything. We plan around forecasts, humidity, and surface temperature so products cure the way manufacturers intended, which is what makes a finish last rather than fail early.

Clean Site From Start to Finish

Chips, dust, and tape ends have a way of ending up in flower beds. Daily containment and cleanup mean your yard, walkways, patios, and vehicles stay exactly as they were when we arrived each morning.

Insert Content

Curb Appeal Backed by Genuine Weather Protection

An exterior is the only part of a house that never gets a day off. Sun, wind, snowmelt, and freeze cycles work at it without pause, and the coating is all that stands between that weather and the material underneath. Washing, scraping, caulking, priming, and two full coats at the specified rates turn a repaint into protection instead of postponement, while every soft board and failed joint found on the way gets shown rather than covered. Houses in Reno, Nevada finish sharp from the street and sealed where it matters. That pairing is what Bighorn Painting & Drywall is really selling, since one without the other is only half a job.

Frequently Asked Questions

How often should a house in this climate be repainted?

Most exteriors here need attention every 7 to 10 years, though south facing walls often fail noticeably first. Elevation, exposure, and the quality of the previous product all shift that particular window considerably in either direction.


Can exterior work be done in summer heat?

Yes, with adjustments. We chase shade around the house, avoiding surfaces baking in direct afternoon sun, because applying to a scorching wall causes flash drying, poor adhesion, and lap marks that never fully disappear later.


What happens if you find rotten wood during prep?

We stop and show you before doing anything. Small sections get cut out and replaced, larger damage gets quoted separately, and nothing is coated over, because sealing rot only hides the problem for a while.


Do you spray exteriors or brush and roll them?

Spraying followed by back rolling gives the best of both. Atomized product covers texture evenly, then rolling works it into the surface so the film bonds mechanically instead of simply sitting on top of it.


How do you protect windows, roofs, and landscaping?

Everything vulnerable gets masked, covered, or fully moved before work starts. Across Reno, Nevada, Bighorn Painting & Drywall treats containment as part of the job rather than an afterthought squeezed in at the very end.


Is one coat ever enough on an exterior?

Rarely. Two coats deliver the film thickness that manufacturers base their warranties on. Backed by 15+ years across Reno, Nevada, Bighorn Painting & Drywall quotes two coats because single coat jobs fail early every time.


Should stucco be sealed differently than wood siding?

Definitely. Stucco really needs a breathable coating that lets moisture vapor escape from inside the wall assembly, while wood needs a flexible film that moves with seasonal swelling without splitting along the visible grain lines.


How long should we keep sprinklers off after painting?

Give fresh coatings at least a full 48 hours before irrigation hits them. Water landing on a curing film can leave spotting or surfactant streaks that require washing later, especially on darker exterior colors and finishes.

How often should a house in this climate be repainted?

Most exteriors here need attention every 7 to 10 years, though south facing walls often fail noticeably first. Elevation, exposure, and the quality of the previous product all shift that particular window considerably in either direction.


Can exterior work be done in summer heat?

Yes, with adjustments. We chase shade around the house, avoiding surfaces baking in direct afternoon sun, because applying to a scorching wall causes flash drying, poor adhesion, and lap marks that never fully disappear later.


What happens if you find rotten wood during prep?

We stop and show you before doing anything. Small sections get cut out and replaced, larger damage gets quoted separately, and nothing is coated over, because sealing rot only hides the problem for a while.


Do you spray exteriors or brush and roll them?

Spraying followed by back rolling gives the best of both. Atomized product covers texture evenly, then rolling works it into the surface so the film bonds mechanically instead of simply sitting on top of it.


How do you protect windows, roofs, and landscaping?

Everything vulnerable gets masked, covered, or fully moved before work starts. Across Reno, Nevada, Bighorn Painting & Drywall treats containment as part of the job rather than an afterthought squeezed in at the very end.


Is one coat ever enough on an exterior?

Rarely. Two coats deliver the film thickness that manufacturers base their warranties on. Backed by 15+ years across Reno, Nevada, Bighorn Painting & Drywall quotes two coats because single coat jobs fail early every time.


Should stucco be sealed differently than wood siding?

Definitely. Stucco really needs a breathable coating that lets moisture vapor escape from inside the wall assembly, while wood needs a flexible film that moves with seasonal swelling without splitting along the visible grain lines.


How long should we keep sprinklers off after painting?

Give fresh coatings at least a full 48 hours before irrigation hits them. Water landing on a curing film can leave spotting or surfactant streaks that require washing later, especially on darker exterior colors and finishes.